Alpine Speakers and Amplifiers

  • system includes two 6-1/2"/6-3/4" woofers, 2 tweeters, and 2 crossovers
  • adapter plates included for fit in 6"x8" openings
  • hybrid layered-pulp woofer with rubber surround
  • 1" silk ring-dome tweeter
  • external crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
  • 7-level tweeter adjustment
  • power range: 8-110 watts RMS (330 watts peak power)
  • frequency response: 65-27,000 Hz
  • sensitivity: 87 dB
  • top-mount depth: 2-3/8"
  • warranty: 1 year

 

  • The SWI-JACK has non-volatile memory which keeps all programming in memory even if the vehicle Battery is disconnected.
  • Great for convertables. Unlike the SWI-X, the SWI-JACK is not affected by sunlight.
  • The SWI-JACK not only covers Ford, GM or Chrysler/Dodge but also it covers Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chysler, GMC, Honda, Hummer, Infiniti, Isuzu, Jaguar, Land Rover, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Toyota and Volkswagan. Oh, did we also say it covers Harley Davidson motorcycles?

 

  • 6-1/2"/6-3/4" 2-way speakers (pair)
  • polypropylene-mica woofer cone with air-injected rubber surround
  • 1" silk dome tweeter
  • power range: 2-80 watts RMS (240 watts peak power)
  • frequency response: 70-22,000 Hz
  • sensitivity: 88 dB
  • top-mount depth: 2-1/8"
  • warranty: 1 year

 

  • 12" subwoofer with dual 4-ohm voice coils
  • pulp/fiber cone reinforced with Kevlar and a layer of Rohacell® plastic film
  • Santoprene rubber surround
  • cast aluminum frame
  • power range: 500-1,000 watts RMS (500 watts per coil)
  • peak power handling: 3,000 watts
  • frequency response: 24-200 Hz
  • sensitivity: 84 dB
  • top-mount depth: 8-11/16"
  • sealed box volume: 0.65-1.25 cubic feet
  • ported box volume: 1.0-2.0 cubic feet
  • warranty: 1 year

 

  • 12" subwoofer with dual 2-ohm voice coils
  • pulp/glass fiber cone reinforced with Kevlar
  • Santoprene rubber surround
  • power range: 50-300 watts RMS (150 watts per coil)
  • peak power handling: 900 watts
  • frequency response: 27-700 Hz
  • sensitivity: 86 dB
  • top-mount depth: 5-1/16"
  • sealed box volume: 0.85-1.5 cubic feet
  • ported box volume: 1.25-2.0 cubic feet
  • warranty: 1 year

 

  • 6"x9" 3-way speakers (pair)
  • polypropylene-mica woofer cone with air-injected rubber surround
  • 5/8" poly dome tweeter and 1" silk dome midrange
  • power range: 2-85 watts RMS (260 watts peak power)
  • frequency response: 65-23,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 3-1/16"
  • warranty: 1 year
Priced per pair

 

  • system includes two 5-1/4" woofers, 2 tweeters, and 2 crossovers
  • hybrid layered-pulp woofer with rubber surround
  • 1" textile ring-dome tweeter
  • external crossovers — 12 dB per octave (high-pass) and 6 dB per octave (low-pass)
  • 7-level tweeter adjustment
  • power range: 8-100 watts RMS (300 watts peak power)
  • frequency response: 70-27,000 Hz
  • sensitivity: 86 dB
  • top-mount depth: 2-3/16"
  • warranty: 1 year

 

  • 6-3/4" 2-way car speakers (pair)
  • hybrid layered-pulp woofer with rubber surround
  • 1" swiveling silk ring-dome tweeter
  • power range: 2-100 watts RMS (300 watts peak power)
  • frequency response: 65-27,000 Hz
  • sensitivity: 87 dB
  • top-mount depth: 2-1/2"
  • warranty: 1 year

 

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 5-1/4" hybrid glass fiber woofer with Natural Butyl Rubber Multi-Roll surround
  • 1-1/4" ring-radiator tweeter
  • 2-way external crossover network with 4-level tweeter control and 6 phase link modules
  • 4-ohm impedance
  • power range: 8-80 watts RMS (240 watts peak power)
  • frequency response: 40-60,000 Hz
  • sensitivity: 87 dB
  • top-mount depth: 2-3/8"
  • includes 5"x7" and 6"x8" mounting plates
  • warranty: 1 year

 

  • 6"x9" 2-way car speakers (pair)
  • hybrid layered-pulp woofer with rubber surround
  • 1" swiveling silk ring-dome tweeter
  • power range: 2-100 watts RMS (300 watts peak power)
  • frequency response: 60-27,000 Hz
  • sensitivity: 89 dB
  • top-mount depth: 3"
  • warranty: 1 year

 

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4" hybrid glass fiber woofer with Natural Butyl Rubber Multi-Roll surround
  • 1-1/4" ring-radiator tweeter
  • 2-way external crossover network with 4-level tweeter control and 6 phase link modules
  • 4-ohm impedance
  • power range: 8-100 watts RMS (300 watts peak power)
  • frequency response: 35-60,000 Hz
  • sensitivity: 88 dB
  • top-mount depth: 2-9/16"
  • includes 5"x7" and 6"x8" mounting plates
  • warranty: 1 year

 

  • 15" subwoofer with dual 4-ohm voice coils
  • Kevlar-reinforced pulp cone with Santoprene rubber surround
  • cast aluminum frame with perimeter venting
  • power range: 400-750 watts RMS (2000 watts peak power)
  • frequency response: 20-400 Hz
  • sensitivity: 87 dB
  • mounting depth: 9-5/16"
  • sealed box volume: 1.3-2.5 cu. ft.
  • ported box volume: 1.5-3.0 cu. ft.
  • Recommended Q-Logic Box Type: 1, 2
  • warranty: 1 year

 

  • 10" subwoofer with dual 4-ohm voice coils
  • pulp/fiber cone reinforced with Kevlar and a layer of Rohacell® plastic film
  • Santoprene rubber surround
  • cast aluminum frame
  • power range: 500-1,000 watts RMS (500 watts per coil)
  • peak power handling: 3,000 watts
  • frequency response: 26-200 Hz
  • sensitivity: 82 dB
  • top-mount depth: 8-5/8"
  • sealed box volume: 0.5-1.0 cubic feet
  • ported box volume: 0.8-1.5 cubic feet
  • warranty: 1 year

 

  • 7" 2-way marine speakers (pair)
  • polymica woofer with Santoprene rubber surround
  • 1" swiveling, titanium dome tweeter
  • built-in tweeter protection
  • built-in 12 dB/6 dB crossover network
  • UV-resistant silver grilles and high-temperature ABS custom frames
  • power range: 2-50 watts RMS (150 watts peak power)
  • frequency response: 45-22,000 Hz
  • sensitivity: 90 dB
  • top-mount depth: 3-11/16"
  • warranty: 1 year

 

  • 10" 4-ohm marine subwoofer
  • molded polypropylene woofer with Santoprene™ rubber surround
  • marine-grade Nomex® spider
  • high-strength polypropylene frame and waterproof rubber mounting gasket
  • suitable for free-air use
  • power handling: 300 watts RMS
  • peak power handling: 900 watts
  • high-excursion design
  • warranty: 1 year

 

  • mono subwoofer car amplifier
  • 600 watts RMS x 1 at 4 ohms (1,000 watts RMS x 1 at 2 ohms)
  • variable low-pass filter (50-200 Hz, 24 dB/octave)
  • variable bass boost (0-12 dB at 50 Hz)
  • subsonic filter (15 Hz, 24 dB/octave)
  • Class D amp with MOSFET power supply
  • STAR Topology (minimizes internal noise and prevents ground interference)
  • speaker- and preamp-level inputs
  • gold-plated screw terminals
  • fuse rating: 25A x 4
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 15"W x 2-7/16"H x 9-9/16"D
  • warranty: 1 year

 

Make a Free Website with Yola.