Pioneer Speakers and Amplifiers

  • 6-by-9-inch, three-way speakers with 270 watts maximum power handling (40 watts nominal)
  • Woofers feature carbon graphite IMPP interlaced aramid/basalt fiber cone with rubber-coated cloth surround
  • 2-1/4-inch paper cone midrange, 3/8-inch PET film dome tweeter
  • Heat-resistant polyester-imide resin voice coil wire for improved power handling
  • 31 Hz to 37 kHz frequency response with 91 dB sensitivity

 

  • 6-1/2-inch marine two-way speakers with 160 watts maximum power handling (30 watts nominal)
  • Water-resistant white IMPP composite woofer
  • 1-1/8-inch PEI dome tweeter with magnetic fluid and equalizer
  • Strenuously resists water, corrosion, and heat
  • 30 Hz to 30 kHz frequency response; 91 dB sensitivity

 

  • 6-1/2-inch two-way speakers with 260 watts maximum power handling (60 watts nominal)
  • Woofers feature dual-layer IMX aramid/basalt fiber composite cone with butyl rubber surround
  • 1-1/8-inch soft-dome tweeters with magnetic fluid and neodymium magnet
  • Built-in crossover with -6dB/octave low-pass and -12dB/octave high-pass filters
  • 35 Hz to 32 kHz frequency response with 88 dB sensitivity

 

  • 6-by-8-inch, three-way speakers with 240 watts maximum power handling (40 watts nominal)
  • Woofers feature composite IMPP cone with interlaced dual aramid fiber and butyl surround
  • 1-1/4-inch soft dome midrange with neodymium magnet and magnetic fluid, 3/8-inch dome tweeter
  • Full depth basket for rich bass response
  • 30 Hz to 28 kHz frequency response with 90 dB sensitivity

 

  • 6" x 9" Premier D Series Car Speakers
  • Power Handling:
    • Peak: 720 watts per pair / 360 watts each
    • RMS: 160 watts per pair / 80 watts each
  • Injection molded matrix aramid-basalt fiber composite cone woofer
  • Butyl rubber surround
  • 1-1/8" Soft dome with magnetic fluid and neodymium magnet
  • Oversized rear chamber tweeter structure
  • Full depth basket design for fuller bass response
  • Dispersion control wave guides
  • Built-in 12 dB/octave low/high pass crossover
  • Glass-imide voice coil bobbin
  • Conex damper
  • Includes speaker grilles
  • 4 ohms impedance
  • Voice coil size and type (if listed)
  • Top-mount depth: 3-1/2"
  • 1-year SonicElectronix.com warranty

Priced Per Pair

  • 12" Single 4 Ohm Shallow Series Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 250 watts
  • Impedance: Single 4 ohms
  • Injection molded polypropylene cone woofer
  • 3-Layer woven radial urethane rubber surround
  • Air suspension system: allows harmonious movement of the drive cone and the main cone for a spiderless design and cleaner sound
  • Angled push terminals for greater versatility and easier installtion
  • 55oz. Magnet structure
  • Frequency response: 20-114 Hz
  • Sensitivity: 91 dB

 

  • 12" 4-ohm shallow subwoofer
  • interlaced basalt and carbon reinforced IMPP cone
  • 3-layer urethane and fiber-woven radial surround
  • cast aluminum basket
  • Air Suspension Control System eliminates traditional spider structure
  • power range: 50-400 watts RMS (1,500 watts peak power)
  • frequency response: 20-230 Hz
  • sensitivity: 93 dB
  • mounting depth: 3-1/4"
  • sealed box volume: 0.5-1.0 cubic feet
  • ported box volume: 0.65-1.0 cubic feet
  • warranty: 1 year

 

  • 4-channel car amplifier
  • 60 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
  • 150 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • 4-channel selectable high- and low-pass filters (80 Hz, 12 dB per octave)
  • MOSFET power supply
  • speaker-level inputs
  • preamp inputs and outputs
  • fuse rating: 25A x 2
  • 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • 14-11/16"W x 2-7/16"H x 10-7/16"D
  • warranty: 1 year

 

Make a Free Website with Yola.